Add Network Printer

From Help-ME

(Difference between revisions)
Jump to: navigation, search
Line 11: Line 11:
<td valign="top" width="70%">
<td valign="top" width="70%">
<ol>
<ol>
-
<li>Click on '''Start, Control Panel, Printers and Faxes'''</li>
+
<li>Click on '''Start''' Menu, point to '''Control Panel''', click on''' Printers and Faxes'''</li>
-
<li>Click '''Add new printer'''</li>
+
</ol>
</td>
</td>
-
<td align="left">
+
<td align="center">
[[Image:print1.png]]
[[Image:print1.png]]
</td>
</td>
Line 20: Line 20:
</table>
</table>
-
'''Enable exception in firewall'''
 
<table>
<table>
<tr>
<tr>
<td valign="top" width="70%">
<td valign="top" width="70%">
-
 
+
<ol>
-
<li>Click "Start" button</li>
+
<li>Click '''Add a printer'''</li>
<li>Select "Settings"</li>
<li>Select "Settings"</li>
''Note: You may see "Control Panel" without selecting "Settings" menu.''
''Note: You may see "Control Panel" without selecting "Settings" menu.''
Line 33: Line 32:
<li>Make sure "Remote Desktop" is checked</li>
<li>Make sure "Remote Desktop" is checked</li>
<li>Click OK</li>
<li>Click OK</li>
-
 
+
</ol>
</td>
</td>
<td align="right">
<td align="right">
-
[[Image:Firewall_settings.png]]
+
[[Image:printnew.png]]
</td>
</td>
</tr>
</tr>
Line 45: Line 44:
<tr>
<tr>
<td valign="top" width="70%">
<td valign="top" width="70%">
 +
<ol>
<li>Go to http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html and click on "putty.exe" to download it.</li>
<li>Go to http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html and click on "putty.exe" to download it.</li>
<li>Save it to your desktop</li>
<li>Save it to your desktop</li>
Line 60: Line 60:
<li>In the menu on the left, click "Session" near the top.</li>
<li>In the menu on the left, click "Session" near the top.</li>
<li>Click the "Save" button again to save tunnel settings.</li>
<li>Click the "Save" button again to save tunnel settings.</li>
-
 
+
</ol>
</td>
</td>
<td align="right">
<td align="right">
[[Image:Putty_1.png]]
[[Image:Putty_1.png]]
 +
 +
[[Image:Putty_2.png]]
 +
</td>
 +
</tr>
 +
</table>

Revision as of 23:29, 7 December 2007

To add a network printer you need its network name and model number.

The mailroom printers are:

meprint1 HP LaserJet 4100 Series
offcolorps HP Color LaserJet 4600


Open Printers and Faxes

  1. Click on Start Menu, point to Control Panel, click on Printers and Faxes

Image:print1.png

  1. Click Add a printer
  2. Select "Settings"
  3. Note: You may see "Control Panel" without selecting "Settings" menu.

  4. Click "Control Panel"
  5. Double click on "Windows Firewall"
  6. Click "Exceptions" tab
  7. Make sure "Remote Desktop" is checked
  8. Click OK

Image:printnew.png

Download and configure Putty

  1. Go to http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html and click on "putty.exe" to download it.
  2. Save it to your desktop
  3. Double click on "putty.exe" on your desktop
  4. Under "Host Name (or IP address)" type "linux.engr.ucsb.edu" (without quotes.)
  5. Under "Saved Sessions" type a name for this session like "Engineering Linux Server" (without quotes.)
  6. Click "Save" button.
  7. Click the plus sign next to "SSH" in the menu on the left.
  8. Click "Tunnels" in the menu that expanded below.
  9. For "Source port" type "3333" (without quotes.)
  10. For "Destination" type the full host name of your computer followed by a colon and number 3389.
  11. i.e. mycomputer.mee.ucsb.edu:3389
    You can also type your ip address if you know it. i.e. 128.111.70.160:3389

  12. Click the "Add" button.
  13. In the menu on the left, click "Session" near the top.
  14. Click the "Save" button again to save tunnel settings.

Image:Putty_1.png

Image:Putty_2.png

Personal tools