Remote Desktop with Putty

From Help-ME

(Difference between revisions)
Jump to: navigation, search
(Download and configure Putty)
(Download and configure Putty)
Line 54: Line 54:
<li>Save it to your desktop</li>
<li>Save it to your desktop</li>
<li>Double click on "putty.exe" on your desktop</li>
<li>Double click on "putty.exe" on your desktop</li>
 +
<li>Under "Host Name (or IP address)" type "linux.engr.ucsb.edu" (without quotes.)</li>
 +
<li>Under "Saved Sessions" type a name for this session like "Engineering Linux Server" (without quotes.)</li>
 +
<li>Click "Save" button.</li>
 +
<li>Click the plus sign next to "SSH" in the menu on the left.</li>
 +
<li>Click "Tunnels" in the menu that expanded below.</li>
 +
<li>For "Source port" type "3333" (without quotes.)</li>
 +
<li>For "Destination" type the host name of your computer followed by a colon and and 3389.</li>
 +
''i.e. mycomputer.mee.ucsb.edu:3389''
 +
<li>Click the "Add" button.</li>
 +
<li>In the menu on the lft, click "Session" near the top.</li>
 +
<li>Click the "Save" button again to save tunnel settings.</li>
</ol>
</ol>
</td>
</td>
<td>
<td>
 +
</td>
</td>
</tr>
</tr>
</table>
</table>

Revision as of 20:13, 7 December 2007

Remote Desktop is a client/server tool that allows you to connect to a Windows machine remotely. Clients exist for all operating systems known to me. Here are a few easy steps to connect to your computer remotely.



Make sure Remote Desktop is enabled and an exception exists in your firewall

Enable Remote Desktop

  1. Right click on "My Computer"
  2. Click "Properties"
  3. Click "Remote" tab on top
  4. Check the box that says "Allow users to connect remotely to this computer"
  5. You don't need to "Select Remote Users" because if your permissions are sufficient to allow users to connect, then your account is already allowed to connect, otherwise, you will not be able to connect and need to send me an email.

  6. Click "OK"

Image:Remote_desktop_settings.png

Enable exception in firewall

  1. Click "Start" button
  2. Select "Settings"
  3. Click "Control Panel"
  4. Double click on "Windows Firewall"
  5. Click "Exceptions" tab
  6. Make sure "Remote Desktop" is checked
  7. Click OK

Image:Firewall_settings.png


Download and configure Putty

  1. Go to http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html and click on "putty.exe" to download it.
  2. Save it to your desktop
  3. Double click on "putty.exe" on your desktop
  4. Under "Host Name (or IP address)" type "linux.engr.ucsb.edu" (without quotes.)
  5. Under "Saved Sessions" type a name for this session like "Engineering Linux Server" (without quotes.)
  6. Click "Save" button.
  7. Click the plus sign next to "SSH" in the menu on the left.
  8. Click "Tunnels" in the menu that expanded below.
  9. For "Source port" type "3333" (without quotes.)
  10. For "Destination" type the host name of your computer followed by a colon and and 3389.
  11. i.e. mycomputer.mee.ucsb.edu:3389

  12. Click the "Add" button.
  13. In the menu on the lft, click "Session" near the top.
  14. Click the "Save" button again to save tunnel settings.
Personal tools